Starting-Motor-Armature-Shaft-Placement-Machine-Axis-Pressing-Machine

Product Description

Starting Motor Armature Shaft Placement Machine Axis Pressing Machine

Starting Motor Armature Shaft Placement Machine Axis Pressing Machine

(1) Application
Hydraulic machine for placing the stack to the and pressing the stack to get better perpendicularity and parallelism on the stack.
 
Press capacity will be min 15 ton.
Press should have position controller and load controller.
Minimum stroke will be 250mm
Distance between the table and shaft end is 450mm 
 
(2) Competitive Advantages
1. The motor manufacturers have 100% satisfactions good feedback 
2. Easy to operate and set on screen
3. Safety curtain ensure the safety
4. Pressure sensor and magnetic scale make sure timely observation and detection
 
(3) Parameter

Hydraulic press applicationFeatures
Bearing pressThe pressure sensor need capable to measure force
Shaft inserting machinePress machine have the capability to define lower and uppler press on
force limits to detect low or upper force.
Commutator placementCommutator press fixture make sure the location of
commutator and slot in a relative fixed place for armature winding process


Starting Motor Armature Shaft Placement Machine Axis Pressing Machine

Starting Motor Armature Shaft Placement Machine Axis Pressing Machine
Starting Motor Armature Shaft Placement Machine Axis Pressing Machine


Starting Motor Armature Shaft Placement Machine Axis Pressing Machine


INQUIRY

CONTACT US

Contact: Emily Gao

Phone: 17721374887

E-mail: [email protected]

Add: 609#, Building B, No. 2699,Youyi Road, Baoshan District,201900 Shanghai